Plastic Elevator Bucket
The plastic elevator buckets in this project included three DS models with different capacities and mounting dimensions:
DS1009: 104 × 90 × 82 mm, hole center 50 mm, 2-Ø7
DS1109: 116 × 90 × 82 mm, hole distance 60 mm, 2-Ø7
DS2312: 235 × 125 × 118 mm, hole distance 120 mm, 2-Ø9
These models are part of our elevator bucket range, which includes plastic and steel bucket designs for different conveying capacities and discharge requirements.
Metal Elevator bucket
The metal elevator bucket section of this order included two 1.5 mm thick steel bucket models:
DS1109-1.5: 110 × 90 × 68 mm, hole distance 60 mm, 2-Ø7
DS1411-1.5: 140 × 112 × 85 mm, hole center 60 mm, 2-Ø7
Steel elevator buckets are commonly selected for applications requiring higher structural strength and durability. For more information about material selection, you can also read Elevator Bucket Materials: Steel, HDPE, Nylon & PU.
Fang Elevator Bolt
The project also included multiple sizes of Fanged Elevator Bolts: M8×25WS, M8×30WS, M8×35WS, M8×40WS and M10×40WS. Each set consisted of one fang bolt, one nyloc nut, one flat washer and one spring washer for secure bucket installation.
You can also browse our complete Elevator Bolt range for ordinary and fanged bolt options in different sizes and materials.
For more information about matching bucket mounting holes with bolts, you can also read Elevator Bucket Installation Hole Types.
Rubber Elevator Belt
The rubber elevator belts supplied for this project included EP200-125×3(2-2), EP200-150×3(2-2) and EP200-200×4(2-2), all in cutting-edge configurations. Different belt widths and ply structures were selected to match the corresponding bucket sizes and operating requirements.
You can browse our Elevator Belt range for PVC and rubber belt options used in bucket elevator systems.
For complete component matching, explore our Bucket Elevator Components solution for plastic and steel buckets, elevator bolts, PVC and rubber belts, pulleys and related installation accessories.
